Instagram

Sunday, November 30, 2014

Upgrading the dividers

Last week I posted about the vertical drawer dividers, and posted this picture:


It looked kind of nice, but not quite good enough. When browsing through my stack of pictures I found ancient cabinets with the dividers like this. The vertical ones butt up square to the underside of the horizontal shelf. Sometimes they are recessed a bit, sometimes they are even with the shelf on the frontside. In other cabinets I found a neater aproach. The dividers are mitered into the shelf.

So I said to myself, I also want mitered dividers! I cut a cm from the front of my dividers and started all over. First chiseling a miter into the bottom of the shelf. I used a block of wood cut at 45 degrees and chiseled a small triangle in the front of the dado.


With everything assembled again I could mark this new triangle on the front edge of the dividers, and paired them with a sharp chisel carefully up to the pencil mark.


I had to give it a few tries. Actually I wasn't happy with the first attempt, so sawed the dividers a little shorter again and gave it a second chance. Now I am reasonably happy with how they look. With a bit of glue and some sawdust to fill in the last small gaps, this is going to look like a nice upgrade.


(Sorry about the poor picture. The Iphone decided that the files in the background were more interesting then my mitered dividers!)

2 comments: